Industry NewsCurrent location :HOME > Industry News

Cement based Self-leveling Compound KDO40M

Time:2023/11/13Posted:SHANDONG KUNDU CHEMICAL CO.,LTD.

CementSelf-leveling compound KDO 40M: It is a kind of Polymer modified cement compound Includes special cement, redispersible polymer powdercellulose ether and other active ingredient, is a high-tech environment -friendly product with advanced technology and formula refined. With fast hardening, people can walk on it after 4-5 hours, and 72 hours later can do surface construction, it’s more convenient for workers to operate than traditional artificial leveling. 


Specifications

 

 Standard: JC/T985-2005

 

Items

Index

Flowability (mm)

Initial flowability

≥135

20min flowability

≥135

Tensile adhesive strength (Mpa)

≥1.0

Wear resistance (g)

≤0.50

Dimensional change rate (%)

-0.15~+0.15

24h compressive strength (Mpa)

≥6.0

24h anti-bending strength (Mpa)

≥2.0

28 days compressive strength (Mpa)

≥35

28 days anti-bending strength (Mpa)

≥6

 

Key Properties

- It is easy to construct by stirring with water manually or mechanically.

- It has good self-leveling and smoothness.

- It has high compressive strength and wear-resistance, low shrinkage that is not easy to crack or generate delaminating and hollowing.

- It has rapid solidification, smooth surface that can be travelled after 6-8 hours. The plastic floor, carpet, tile or wood floor can be paved on the surface after 48 hours.

- It is environmental and non-toxic product.

 

Application range

- It is suitable for residential offices and commercial terraces.

- It is suitable to be the substrate of epoxy floor, pharmaceutical factory, food factory, industrial workshop and

kindergarten, etc.

 

Construction method

  1. The substrate must be clean, dry firm and no any residue, then use KDO special interface agent to paint the base plane.
  2. After about 2-6 hours, mixed with water before construction, be sure to strictly self-leveling cement: water 25:6.5 ~ 7.5kg mixed. First 6.5~ 7.5kg of water into the bucket, then pour the product side down while stirring until a homogeneous mixture, lay up 1 minute, then stir once again briefly.
  3. Pour the mixture into the construction area, a zigzag rake to move to a desired uniform thickness (thickness constructability 1-30mm).
  4. Before initial setting, use defoaming roller to exclude air which mixed in before.

 

Attentions

1.  No excess water or it may decrease the compressive strength.

2.  No strong wind and sun within 48 hours after construction.

Packing & Storage

A. Standard Packing: In 25kg paper bags inner with PE bags.

B. Big Bag or other special packages are possible on request.

Store it in dry condition, and storage time should not exceed 12 months.

Safety Notes

The above date is in accordance with our knowledge, but don’t absolve the clients carefully checking it all immediately on receipt. To avoid the different formulation and different raw materials, please do more testing before using it. We reserve the right to alter our product and without informing in advance.


Pre:BRAZIL ABRAFATI SHOW 2023
Pre:Gypsum based Self-leveling Compound KDO370
CONTACT US
  • Tel: +86 131 531 44592
  • Fax: +86 531 82924317
  • WhatsApp:+8613153144592
  • E-mail:info@kdchemicals.com
  • Address: No.17 Huanghe Industrial Zone, Jinan City, Shandong, China
Copyright © 2017 SHANDONG KUNDU CHEMICAL CO.,LTD. All Right Reserved
ABOUT US
Company Profile
Company Culture
PRODUCTS
Polycarboxylate Superplasticizer
HPMC
Cellulose Fiber
Redispersible Polymer
Polypropylene Fiber
Calcium Formate
NEWS
Company News
Industry News