The redispersed polymer powder KDO 6010N serves as an indispensable functional additive for mixed mortar, thereby improving the performance of the mortar, improving the strength of the mortar, improving the bonding strength of the mortar with various substrates, and improving the mortar properties and compressive strength. Flexibility and deformability, bending strength, wear resistance, toughness, adhesion and water-holding capacity, processability. In addition, polymer powders with hydrophobic properties can make for good waterproof mortars.

Redispersible polymer powder KDO 6010N applications

Tile adhesive, exterior wall exterior insulation system bonding mortar, exterior wall exterior insulation system plastering mortar, ceramic tile grouting agent, exterior wall flexible putty, flexible anti-cracking mortar, rubber powder polystyrene particle insulation mortar.

Precautions for using redispersible polymer powder:

The redispersible polymer powder KDO 6010N should not be put in at one time, but should be weighed in portions to find the appropriate amount.

When adding polypropylene fiber, it must be dispersed in cement first, because the fine particles of cement can eliminate the static electricity of the fiber so that the polypropylene fiber can be dispersed.

Stir to mix evenly, but the mixing time should not be too long, 15 minutes is appropriate. Mixing sand and cement for a long time will easily cause sedimentation and stratification.

It is necessary to adjust the dosage of additives and add an appropriate amount of HPMC according to seasonal changes.

Prevent additives or cement from clumping when exposed to moisture.

It is strictly prohibited to mix, stack and use with acidic substances.

It is prohibited to use it in construction below 5℃. Low-temperature construction will cause the biggest project quality problem, causing the plastering mortar and the insulation board to not bond. This is a project quality problem for which there is no remedial plan in the later stage.